In daily life, what we call the chassis mostly refers to the mainframe of the computer. A good chassis structure is very important for the mainframe of the computer. With the improvement of technology and the progress of living standard, people have put forward higher requirements for the appearance and structure of the chassis. Jinan chassis and cabinet manufacturer briefly describes the requirements of modern cabinet structure design.

1、貫徹尺度化、模塊化：尺度化是我國的一項緊湊技術經濟政策和治理措施，它對于提高產品質量和出產率、便于使用維修、增強企業治理、降低出產本錢等都具有緊張作用，結構設計中必需盡量削減非常零、部件的數目，增長通用件的數目，盡可能多的采用尺度化、規格化的零、部件和尺寸系列。

1. Carry out standardization and Modularization: standardization is a compact technical and economic policy and governance measure in China. It plays an important role in improving product quality and production rate, facilitating use and maintenance, enhancing enterprise governance, and reducing production cost. In structural design, it is necessary to reduce the number of special parts and components, increase the number of general parts, and adopt scale as much as possible Standardized parts, components and size series.

2、優良的結構工藝性：結構與工藝是緊密親密相干的，采用不同的結構就響應有不同的工藝。而且機箱結構設計的質量必需要有優良的工藝措施來保證，因此在機箱結構設計中，就得要求設計者必需結合出產現實考慮其結構工藝性。

2. Excellent structure technology: structure and technology are closely related, different structures respond to different processes. Moreover, the quality of chassis structure design must be guaranteed by excellent process measures. Therefore, in the design of chassis structure, the designer must consider the structural process combining with the production reality.

3、設備的操縱使用與安裝維修更便捷：為了能更好地操縱和使用設備，必需使機箱機柜的結構設計吻合人的生理特點。同時還要求產品的結構簡樸，裝拆利便。此外，面板上的控制器、看到的裝置必需進行公道現配與布局，以及考慮工作職員的人身安全標題題目。

3. The operation, installation and maintenance of the equipment are more convenient: in order to operate and use the equipment better, it is necessary to make the structural design of the cabinet conform to human physiological characteristics. At the same time, it also requires simple structure and convenient assembly and disassembly. In addition, the controller on the panel and the devices seen must be reasonably configured and arranged, and the personal safety of the staff should be considered.
                           

4、機箱結構與外觀相協調：跟著個性消費經濟時代的到來，人們在購買產品時更加注重產品外觀的形態美，產品外觀設計的重要性日益突顯，機箱結構設計需要考慮到機箱外觀設計方面的要求，并在不影響產品功能的條件下盡可能配合機箱的外觀設計，使機箱的內在與外在相協調統一。

4. Coordination of chassis structure and appearance: with the advent of the era of personalized consumer economy, people pay more attention to the appearance beauty of products when purchasing products, and the importance of product appearance design is increasingly prominent. The design of chassis structure needs to consider the requirements of chassis appearance design, and try to cooperate with the appearance design of chassis without affecting the product function, so as to make the inside of the chassis more convenient In harmony with the external unity.

此外，在設計機箱機柜時，還需要考慮機箱內部元件、機箱的零部件之間的電磁干擾和熱的影響，進一步進步電機能的穩固性。需細致機箱的強度、鋼度標題題目，以免產生變形，引起電氣接觸不良、門、插接件卡滯，甚至受振后損壞。需按劃定的工作環境和使用前提，采取相應的措施以進步設備的可靠性和使用壽命，保證產品技術參數符合行業要求。

In addition, in the design of the cabinet, the electromagnetic interference and thermal influence between the internal components and parts of the cabinet should be considered to further improve the stability of the motor. It is necessary to pay attention to the strength and steel title of the case, so as to avoid deformation, poor electrical contact, door, connector clamping, and even damage after vibration. In order to improve the reliability and service life of the equipment and ensure that the technical parameters of the product meet the requirements of the industry, corresponding measures should be taken according to the designated working environment and use premise.